Ness Utepo CP2-300 Wireless Bridge

Part Number : 101-793

or

Quick Overview

Ness Wireless Bridge




Ness Corporation 101-793 Ness Utepo CP2-300 Wireless Bridge

More Views

  • Ness Corporation 101-793 Ness Utepo CP2-300 Wireless Bridge
 
 
  Description    Downloads    Specifications  

Description

"2.4G 12dBi 300M Outdoor CPE"

 

The CP2-300 is a One Key pairing, web managed Wireless Link. It is specially designed to wireless network of surveillance system of engineering project, which is to transmit the data of cameras from one location to another. Different from the traditional cable transmission, it is not limited by the distance, and features with simple construction and low cost. Meanwhile, it saves the deployment time, effectively shortens construction period and reduces construction cost.

Support transmission of 300Mbps 500 Meters Line of Sight.

Paired and up and running in literally less than 2 minutes.!

 

Advantage

√ 802.11B/G/N.

√ Support 24V PoE or 12V/1A powered way.

√ Up to 300Mbps, connecting with 200MP HD cameras without any blocking.

√ IP65 enclosure.

√ Simple one button setup. 

√ Includes PoE Power Injectors to power the unit, or can be powered from 12VDC PSU.

 Typical applications could be In an Elevator shaft to get a Camera feed in the lift to a NVR, Camera at a front gate to a building or anywhere you need a IP device from one location to another and can't run a network cable. This also includes Video Intercom IP Link.!


 

                                               

 

                    
             
     

              

Introduction and Quick

Setup Video

DATASHEET

USER MANUAL

QUICK

INSTALLATION

             GUIDE            

Model 

  CP2-300

Main Chip

MTK7628KN 300Mbps

Wireless Technology

2.4G:300Mbps  802.11b/g/n MIMO

Memory

DDR2 8MB

Flash

4MB

Interface

2*10/100 Mbps auto-sensing RJ45 ports

Button

1*Digital Switch/Reset.  Value 1 added by short pressing, reset by pressing in 5s.

LED

LAN1/PoE, LAN2, PWR

Power

Passive PoE: 24V 0.5A  DC 12V 1A, power consumption﹤10W

Antenna

Built-in 12dBi directional antenna with dual polarization

Horizontal angle: 45 degree, vertical angle: 45 degree.

Operating Environment

Temperature: -30℃~+55℃ (Operation), -40℃ ~+70℃ (Storage) Humidity (Non-condensing): 10%~90% (Operation), 5%~95%(Storage)

Dimension

200mm×115mm×60mm

Weight

400g

Modulation

OFDM = BPSK,QPSK,16-QAM,64-QAM;DSSS = DBPSK,DQPSK,CC

Power Output

11n: @MCS7:16±2dB,    @MCS0:16±2dB

11g: @54M:16±2dB,     @6M:17±2dB

11b: @11M:18±2dB,     @1M:18±2dB

Frequency Range

ISM: 2.300GHz ~ 2.4835GHz

Operating Channel

2.4G: 1,  2,  3,  4,  5,  6,  7,  8,  9,  10,  11,  12,  13,  32,  33,  37,  38,  42,  43

Receiver Sensitivity

802.11n: -70dbm@MCS7, -88dbm@MCS0 802.11g: -72dbm@54Mbps, -88dbm@6Mbps 802.11b: -85dbm@11Mbps, -94dbm@1Mbps

Operation Mode

Master AP,  Slave AP (Through dial switch)

Networking Mode

Point to Point, Point to multipoint  (Within 8 points)

Management

WEB

Default IP: 169.254.254.254

Username/Password: utepo/utepo

Network

Bridge: Static IP/ Dynamic IP

Additional Information

Part Number 101-793

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.