NESS 4G DIALLER with Telstra SIM Card

Part Number : 106-250S

or

Quick Overview

Provide a full time 3G/4G pathway for alarm diallers to communicate in the absence of a land line.
Ness Corporation 106-250S 4G GSM Dialler

More Views

  • Ness Corporation 106-250S 4G GSM Dialler
 
 
  Description    Downloads    Technical Features  

Description

"4G Dialler with Ness Telstra SIM Card"

Worried about the absence of PSTN phone lines with the NBN roll out? Then worry no more as Ness has the solution with our 4G GSM Dialler.

The Ness 4G Dialler provides a 3G or 4G pathway for alarm diallers to communicate in the absence of a land line. Ideal for “Naked phone line” households, remote locations and anywhere you need easy and reliable cellular dialler monitoring.

This unit provides support for any dialler that reports to any Central Monitoring Station (without a need to any special control room receiver) or can dial an alarm event to a personal number, in the same fashion as it would if a land line was available. 

This model is supplied with a locked Ness Telstra SIM card. Contact Ness Sales staff for SIM Card rates.

Also includes a back up battery to allow operation in the event of mains power failure.

No programming of GSM Dialler required, just plug and go.

Supplied with plug pack power supply, 4G Antenna and Telstra SIM Card.

 

BROCHURE

SPECIFICATIONS

GSM Compatibility      

3G/4G

AU Frequencies Supported MHz

4G
Telstra B1 2100, B3 1800, B7 2600, B8 900, B28 700
Optus B1 2100, B3 1800, B7 2600, B28 700, B40 2300
Vodafone B1 2100, B3 1800, B5 850
3G
Telstra B5 850
Optus B8 900, B1 2100
Vodafone B1 2100

SIM CARD
Supplied with Ness Telstra Sim Card (Standard size SIM)
 
Alarm Panel compatibility     Compatible with most alarm diallers in Contact ID DTMF and Voice formats, 
Including all Ness systems (e.g. D8X/D16X Series, D8xD / D16XD Series, 
SmartLiving Series and M1 Series) 
 
Operation Voltage 12VDC (Plug Pack Supplied)

Battery Backup
Internal rechargeable Battery (Included)

Battery Backup Time max.
2-3 Hours on its own internal battery.

Power Consumption
25mA (Standby), 300mA (Communicating)

Antenna
3dB whip with magnetic base and 2.9m Cable length

Dimensions
175 x 115 x 35 mm

Weight
370g

Operation Temperature

0°C to +50°C

Additional Information

Part Number 106-250S

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.