NESS D16XCel 3G PANEL WITH NAVIGATOR KEYPAD & G1 Z-Wave Gateway (inc locked SIM)

Part Number : K-1302


Quick Overview

Versatile 16 Zone 3G Alarm System  /Z-Wave Kit

K-1302 Ness Corporation NESS D16XCel 3G PANEL WITH NAVIGATOR KEYPAD & G1 Z-Wave Gateway

More Views

  • K-1302 Ness Corporation NESS D16XCel 3G PANEL WITH NAVIGATOR KEYPAD & G1 Z-Wave Gateway
  Description    Technical Features    Downloads    Supplied with  


"16 Zone 3G Alarm System with Z-Wave Gateway"


Flexible 16 Zone control panel, 3G Cellular communicator and Z-Wave Gateway. Great starter kit to combine the versatile Ness 8 zone control panel and Z-Wave control in one package.  

Supplied with 3G Communicator onboard, Powerful NAVIGATOR Touchscreen keypad, plug pack, battery, housing, IP232 Module and Ness G1 Z-Wave Gateway.


Feature Include:

* Operation and programming by SMS messaging
* Remote operation and programming via the free NessXCEL app
* Alarm reporting back to base by CID and/or self monitoring by SMS
* Powerful SMS accessibility including: arm/ disarm, programming, check system status,read alarm memory, receive alarm messages and operate AUX outputs all by SMS / TXT
* Supports SMS reporting
* Fully customisable word library for SMS messaging
* All-new KPX and Navigator Keypads supporting cellular operation

This panel is locked to the Ness SIM provided. The SIM must be activated on a Ness network plan and monthly charges apply. See Third party SIMs are not supported.


Smart Device Apps

zComms: iOS Ness zComms - Android Ness zComms




Control Panel D16XCel

3G MODULE Dual-Band UMTS/HSPA+ 800(850)/2100MHz Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz
BOX DIMENSIONS (W - H - D) 235 x 300 x 90 mm
POWER SUPPLY 20VDC (Supplied) or 17VAC 1.4 Amp
POWER SUPPLY 13.8v DC @ 800mA
RECHARGEABLE BATTERY 12 volt 7.0 Amp/hour Sealed lead Acid
BATTERY CHARGING CURRENT                                       350mA maximum, current limited
DYNAMIC BATTERY TEST Backup battery is tested under load, hourly and on arming
FUSES 2 Amp auto resetting  / Siren output & Reset output. 
500mA auto resetting / 12 volt auxiliary outputs. 
200 mA auto resetting / Strobe output
ZONE OUTPUTS 16 zone inputs. 2 x 24hr tamper inputs
END OF LINE RESISTOR Choice of 12 programmable values including N/C. 
Default 2200 Ohms (2.2k)
INTEGRATED RADIO OPTIONS Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 8 radio zones
SERIAL HEADER Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data
INTEGRATED ACCESS CONTROL Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers
SIREN OUTPUT On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers
STROBE OUTPUT 12v DC timed output. Maximum 2 x 1 Watt strobe lights
RESET OUTPUT 12v DC timed output. Max. 3 x 12v piezo screamers
EQUIPMENT POWER OUTPUT 13.8v DC output for powering detectors and other equipment. Maximum 500mA
AUX READER Multi-pin connector provides outputs Aux1, Aux2, Aux3, Aux4, 12v DC


Z-Wave Gateway

  Models :     Ness G1 Z-Wave Gateway                                                              
Power : DC 5V, 1.5A
Processors : RISC CPU
Network Interface : Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45
Z-Wave Module :  Sigma Design 500 series module Tx RF Power : -26 ~ 2 dBm. Range: 100 meters open site
921.42 MHz
Buttons : One reset button, to factory default settings,
One WPS button for automatic WiFi setup
Indicators :  One LED for Internet connection status indication 
One LED for Ethernet connection indication 
One LED for Z_wave signal indication
Speaker : Built-in 0.5W speaker for device inclusion/exclusion status indication
Installation :  Plug & play by ID/password.

Management and

Management software Ness zComms for multi-gateway management,
Firmware upgrades via FTP
Supported Protocols : IPv4, HTTP, TCP, ICMP, UDP, SNTP, FTP, DHCP, ARP, DNS, PPPoE, etc.
Accessories Included : Power adaptor, RJ45 Ethernet cable, quick installation guide, ID/Password card.
App : App Ness zComms for Android and iPhone/iPad
Alarm and Event Management :  Push notification on iPhone/iPad and Android devices.
Dimensions (HxWxD) : 96 x 96 x 21 mm
Weight :  129 g, incl. gateway bracket, excl. power adaptor
Approvals :  EMC - CE, FCC Part 15 Subpart B Class B Wireless RF - CE, FCC Part 15 Subpart C Power supply: CE, FCC, UL, EN 60950
Operating conditions :    0-50 °C Humidity 20 – 80% RH (non-condensing)



Z-Wave Gateway


Z-Wave Gateway MANUAL

1 x 106-314 D16XCel panel with onboard 3G Dialler, complete with Power Supply and 12V 7 A/H Back Up Battery

1 x 106-100 D8/D16 Touchscreen Keypad

1 x 101-244 IP232 Ethernet Module

1 x 101-800 G1 Z-Wave Gateway

Additional Information

Part Number K-1302

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.