Ness Corporation NESS D16XD DELUXE PANEL & PIR KIT

Description Benefits Technical Features Downloads Supplied With

"Smart Wired Alarm System"

Ness D16XD Panel & PIR kit with the LCD Keypad provides both the user and the installer with unrivaled ease of use. Its self-explanatory operation guides provide you with plain English displays and intuitive operation.

Ness LCD Keypad makes it easy to view your entire system. Get prompts for arming/disarming, home automation features, emergency alarms and much more.

Kit Includes;

1 x 106-165 D16XD Control Panel inc PSupply & 12V 7Ah batt

1 x 106-310 KPX+ LCD Keypad White

2 x 100-234 Ness XIR-100H PIRs

K-6210

d16

High constrast LCD with blue backlighting

Easy to read LCD icons

Adjustable keypad beep volume and LCD brightness

LCD keypad pairs for fIre, panIc and medical

Day mode & monitor mode

Control Panel D16XD
BOX DIMENSIONS (W - H - D)	235 x 300 x 90 mm
POWER SUPPLY	17VAC 1.4 Amp (Supplied)
POWER SUPPLY	13.8v DC @ 800mA
QUIESCENT CURRENT DRAW	80mA with 1 keypad
OPERATING VOLTAGE	17VAC / 15VDC
RECHARGEABLE BATTERY	12 volt 7.0 Amp/hour Sealed lead Acid
BATTERY CHARGING CURRENT	350mA maximum, current limited
DYNAMIC BATTERY TEST	Backup battery is tested under load, hourly and on arming
FUSES	2 Amp auto resetting / Siren output & Reset output. 500mA auto resetting / 12 volt auxiliary outputs. 200 mA auto resetting / Strobe output
ZONE OUTPUTS	16 zone inputs. 2 x 24hr tamper inputs
END OF LINE RESISTOR	Choice of 12 programmable values including N/C. Default 2200 Ohms (2.2k)
MAXIMUM KEYPADS	3.
INTEGRATED RADIO OPTIONS	Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 8 radio zones
SERIAL HEADER	Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data
INTEGRATED ACCESS CONTROL	Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers
SIREN OUTPUT	On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers
STROBE OUTPUT	12v DC timed output. Maximum 2 x 1 Watt strobe lights
RESET OUTPUT	12v DC timed output. Max. 3 x 12v piezo screamers
EQUIPMENT POWER OUTPUT	13.8v DC output for powering detectors and other equipment. Maximum 500mA
AUX READER	Multi-pin connector provides outputs Aux1, Aux2, Aux3, Aux4, 12v DC