Description Technical Features Downloads Supplied With
Description
"Versatile 8 Zone 3G Alarm System in Metal Housing"
Flexible 8 Zone 3G control panel Supplied in a 28" metal housing, plug pack, battery, 3G Communicator, and manuals.
Keypads sold separately.
This panel is locked to the Ness SIM provided. The SIM must be activated on a Ness network plan and monthly charges apply. See www.activate.ness.com.au Third party SIMs are not supported.
Smart Device Apps Android App: Ness aComms iOS App: Ness iComms Android App: Ness XCEL iOS App: Ness XCEL d8 K-6014
|
|
|
|
D8X Control Panel |
|
| BOX DIMENSIONS (W - H - D) | 362 mm wide, 712mm high, 89 mm deep |
| PLUG PACK | 20VDC |
| POWER SUPPLY | 13.8v DC @ 800mA |
| QUIESCENT CURRENT DRAW | 80mA with 1 keypad |
| OPERATING VOLTAGE | 9.5v – 14v DC |
| RECHARGEABLE BATTERY | 12 volt 7.0 Amp/hour Sealed lead Acid |
| BATTERY CHARGING CURRENT | 350mA maximum, current limited |
| DYNAMIC BATTERY TEST | Backup battery is tested under load, hourly and on arming |
| FUSES | 2 Amp auto resetting Siren output & Reset output. 500mA auto resetting 12 volt auxiliary outputs. 200 mA auto resetting Strobe output |
| ZONE OUTPUTS | 8 zone inputs. 2 x 24hr tamper inputs |
| END OF LINE RESISTOR | Choice of 12 programmable values including N/C. Default 2200 Ohms (2.2k) |
| MAXIMUM KEYPADS | 3 x Navigator Touch Keypads max. |
| INTEGRATED RADIO OPTIONS | Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 8 radio zones |
| SERIAL HEADER | Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data |
| INTEGRATED ACCESS CONTROL | Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers |
| SIREN OUTPUT | On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers |
| STROBE OUTPUT | 12v DC timed output. Maximum 2 x 1 Watt strobe lights |
| RESET OUTPUT | 12v DC timed output. Max. 3 x 12v piezo screamers |
| EQUIPMENT POWER OUTPUT | 13.8v DC output for powering detectors and other equipment. Maximum 500mA |
| AUX READER | Multi-pin connector provides outputs Aux1, Aux2, Aux3, Aux4, 12v DC |
 |
 |
 |
|
| BROCHURE | INSTALLATION MANUAL |
USER MANUAL |
|
 |
|
 |
|
| ANDROID APP aCOMMS |
ANDROID APP NESS XCEL |
iPHONE APP iCOMMS |
iPHONE APP NESS XCEL |
1 x 106-313 D16XD control Panel kit, complete with Power Supply and 12VDC 7A/H Back Up Battery,
1 x 101-501 28" Metal Housing;
Additional Information
| Part Number | K-8015 |
|---|
Related Products
View Cart
You have no items in your shopping cart.
Compare Products
You have no items to compare.
