Description
"Versatile 8 Zone 3G Alarm System"
Flexible 8 Zone control panel & 3G Cellular communicator. The Ness D8Xcel is the most versatile Ness 8 zone control panel ever!
Supplied with 3G Communicator onboard, Powerful NAVIGATOR Touchscreen keypad, plug pack, battery, housing and manuals.
Feature Include:
* Operation and programming by SMS messaging
* Remote operation and programming via the freeNessXCEL app
* Alarm reporting back to base by CID and/or self monitoring by SMS
* Powerful SMS accessibility including: arm/ disarm, programming, check system status,read alarm memory, receive alarm messages and operate AUX outputs all by SMS / TXT
* Supports SMS reporting
* Fully customisable word library for SMS messaging
* All-new KPX and Navigator Keypads supporting cellular operation
BYO SIM. This panel will work with any compatible standard size SIM supporting 3G networks.
Smart Device Apps
Android App: Ness aComms
iOS App: Ness iComms
Android App: Ness XCEL
iOS App: Ness XCEL
K-6006
d8
Control Panel D8XCel |
|
3G MODULE | Dual-Band UMTS/HSPA+ 800(850)/2100MHz Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz |
SIM CARD TYPE | Standard SIM |
BOX DIMENSIONS (W - H - D) | 235 x 300 x 90 mm |
POWER SUPPLY | 20VDC (Supplied) or 17VAC 1.4 Amp |
POWER SUPPLY | 13.8v DC @ 800mA |
QUIESCENT CURRENT DRAW | 80mA with 1 keypad |
OPERATING VOLTAGE | 17VAC / 15V DC |
RECHARGEABLE BATTERY | 12 volt 7.0 Amp/hour Sealed lead Acid |
BATTERY CHARGING CURRENT | 350mA maximum, current limited |
DYNAMIC BATTERY TEST | Backup battery is tested under load, hourly and on arming |
FUSES | 2 Amp auto resetting / Siren output & Reset output. 500mA auto resetting / 12 volt auxiliary outputs. 200 mA auto resetting / Strobe output |
ZONE OUTPUTS | 8 zone inputs. 2 x 24hr tamper inputs |
END OF LINE RESISTOR | Choice of 12 programmable values including N/C. Default 2200 Ohms (2.2k) |
MAXIMUM KEYPADS | 3. |
INTEGRATED RADIO OPTIONS | Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 8 radio zones |
SERIAL HEADER | Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data |
INTEGRATED ACCESS CONTROL | Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers |
SIREN OUTPUT | On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers |
STROBE OUTPUT | 12v DC timed output. Maximum 2 x 1 Watt strobe lights |
RESET OUTPUT | 12v DC timed output. Max. 3 x 12v piezo screamers |
EQUIPMENT POWER OUTPUT | 13.8v DC output for powering detectors and other equipment. Maximum 500mA |
AUX READER | Multi-pin connector provides outputs Aux1, Aux2, Aux3, Aux4, 12v DC |
![]() |
![]() |
![]() |
|
BROCHURE | INSTALLATION MANUAL |
USER MANUAL |
|
![]() |
![]() |
![]() |
![]() |
ANDROID APP aCOMMS |
ANDROID APP NESS XCEL |
iPHONE APP iCOMMS |
iPHONE APP NESS XCEL |
1 x 106-311NS D8XCel panel with onboard 3G Dialler, complete with Power Supply and 12V 7A/H Back Up Battery
1 x 106-100 D8/D16 Touchscreen Keypad
Additional Information
Part Number | K-8308NS |
---|