Ness Corporation NESS D8XCel 3G DELUXE CONTROL PANEL & SIREN KIT (LCD KEYPAD)

Description Technical Features Downloads Supplied With

"Simple and Smart 3G Alarm System KIT"

Ness D8Xcel 3G Deluxe Kit including, D8Xcel 3G Panel, Internal and External Sirens and LCD Keypad.

With 3G Communicator onboard makes communicating to a control room or self monitoring simple and secure.

Features Include:

* Operation and programming by SMS messaging
* Remote operation and programming via the free Ness XCEL app
* Alarm reporting back to base by CID and/or self monitoring by SMS
* Powerful SMS accessibility including: arm/ disarm, programming, check system status,read alarm memory, receive alarm messages and operate AUX outputs all by SMS / TXT
* Supports up to 10 mobile phone numbers for SMS reporting
* Fully customisable word library for SMS messaging
* All-new KPX and Navigator Keypads supporting cellular operation

Includes Ness Telstra SIM.

Smart Device Apps

Android App: Ness aComms

iOS App: Ness iComms

Android App: Ness XCEL

iOS App: Ness XCEL

K-6011

Control Panel D8XD
BOX DIMENSIONS (W - H - D)	235 x 300 x 90 mm
POWER SUPPLY	20VDC (Supplied)
POWER SUPPLY	13.8v DC @ 800mA
QUIESCENT CURRENT DRAW	80mA with 1 keypad
OPERATING VOLTAGE	20VDC / 17VAC
RECHARGEABLE BATTERY	12 volt 7.0 Amp/hour Sealed lead Acid
BATTERY CHARGING CURRENT	350mA maximum, current limited
DYNAMIC BATTERY TEST	Backup battery is tested under load, hourly and on arming
FUSES	2 Amp auto resetting / Siren output & Reset output. 500mA auto resetting / 12 volt auxiliary outputs. 200 mA auto resetting / Strobe output
ZONE OUTPUTS	8 zone inputs. 2 x 24hr tamper inputs
END OF LINE RESISTOR	Choice of 12 programmable values including N/C. Default 2200 Ohms (2.2k)
MAXIMUM KEYPADS	3.
INTEGRATED RADIO OPTIONS	Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 8 radio zones
SERIAL HEADER	Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data
INTEGRATED ACCESS CONTROL	Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers
SIREN OUTPUT	On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers
STROBE OUTPUT	12v DC timed output. Maximum 2 x 1 Watt strobe lights
RESET OUTPUT	12v DC timed output. Max. 3 x 12v piezo screamers
EQUIPMENT POWER OUTPUT	13.8v DC output for powering detectors and other equipment. Maximum 500mA
AUX READER	Multi-pin connector provides outputs Aux1, Aux2, Aux3, Aux4, 12v DC