Ness Corporation NESS D16XCel 3G PANEL WITH WHITE LCD KEYPAD

Description Technical Features Downloads Supplied with

"Versatile 16 Zone 3G Alarm System"

Flexible 16 Zone control panel & 3G Cellular communicator. The Ness D16Xcel is the most versatile Ness 16 zone control panel ever!

Supplied with 3G Communicator onboard, LCD keypad, plug pack, battery, , housing and manuals.

Feature Include:

* Operation and programming by SMS messaging
* Remote operation and programming via the freeNessXCEL app
* Alarm reporting back to base by CID and/or self monitoring by SMS
* Powerful SMS accessibility including: arm/ disarm, programming, check system status,read alarm memory, receive alarm messages and operate AUX outputs all by SMS / TXT
* Supports up to 10 mobile phone numbers for SMS reporting
* Fully customisable word library for SMS messaging
* All-new KPX and Navigator Keypads supporting cellular operation

Includes Ness Telstra SIM.

Smart Device Apps

Android App: Ness aComms

iOS App: Ness iComms

Android App: Ness XCEL

iOS App: Ness XCEL

K-6006

Control Panel D8XCel
3G MODULE	Dual-Band UMTS/HSPA+ 800(850)/2100MHz Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz
SIM CARD TYPE	Standard SIM
BOX DIMENSIONS (W - H - D)	235 x 300 x 90 mm
POWER SUPPLY	20VDC (Supplied) or 17VAC 1.4 Amp
POWER SUPPLY	13.8v DC @ 800mA
QUIESCENT CURRENT DRAW	80mA with 1 keypad
OPERATING VOLTAGE	17VAC / 15V DC
RECHARGEABLE BATTERY	12 volt 7.0 Amp/hour Sealed lead Acid
BATTERY CHARGING CURRENT	350mA maximum, current limited
DYNAMIC BATTERY TEST	Backup battery is tested under load, hourly and on arming
FUSES	2 Amp auto resetting / Siren output & Reset output. 500mA auto resetting / 12 volt auxiliary outputs. 200 mA auto resetting / Strobe output
ZONE OUTPUTS	16 zone inputs. 2 x 24hr tamper inputs
END OF LINE RESISTOR	Choice of 12 programmable values including N/C. Default 2200 Ohms (2.2k)
MAXIMUM KEYPADS	3.
INTEGRATED RADIO OPTIONS	Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 16 radio zones
SERIAL HEADER	Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data
INTEGRATED ACCESS CONTROL	Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers
SIREN OUTPUT	On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers
STROBE OUTPUT	12v DC timed output. Maximum 2 x 1 Watt strobe lights
RESET OUTPUT	12v DC timed output. Max. 3 x 12v piezo screamers
EQUIPMENT POWER OUTPUT	13.8v DC output for powering detectors and other equipment. Maximum 500mA
AUX READER	Multi-pin connector provides outputs Aux1, Aux2, Aux3, Aux4, 12v DC