M1-XEP ETHERNET MODULE

Part Number : 101-215

or

Quick Overview

M1-XEP ethernet port bus expander / interface.

More Views

 
 
  Description    Benefits    Technical Features    Downloads  

Description

 

The Ness-M1XEP  is an Ethernet module with a RS-232 Serial Port Interface. It may be used to connect a control in the M1 Family to an Ethernet network. It features email event notification and FIPS compliant encryption algorithms for security sensitive environments.

A software setup utility is built into ElkRP for configuring the connection setup, network password, etc. The M1 Ethernet Interface is factory defaulted to obtain a dynamic IP address from a DHCP server (i.e. router, cable modem, etc.). It may optionally be setup with a static IP address.

• Secure connection with password protection and SSL/TLS encryption
• Flash Memory for Firmware Updating
• Event notification via E-Mail (SMTP)
• Supports automatic Dynamic DNS Updates with providers using the DynDNS protocol.
• Supports Network Time Protocol for synchronizing the M1/EZ8's clock with an Internet time server.
• Internet Monitoring and Reporting Capability
• Network stack supporting the following protocols:
   -TCP,UDP,DHCP,SSL/TLS, NTP, SMTP
• Federal Information Processing Standards (FIPS) 128 bit encryption
• Integrated 802.3 compliant 10/100 Mbit network interface
• RS232, DB9M 9-pin serial port connection
• Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default)
• RJ45 8-pin Network Jack
• 2.1mm barrel type power connector (center positive)
• LED Indicators for Power, Link, and Data

 

Web server with embedded Java applet "M1 Virtual Keypad"

 

Secure connection with password protection and HTTPS encryption

 

Flash Memory for Firmware Updating

 

Event notification via E-Mail (SMTP)

 

Internet Monitoring and Reporting Capability

 

TCP/IP stack supporting the following protocols: TCP,UDP,DHCP,SSL 3.0/TLS 1.0, HTTP, SMTP

 

Federal Information Processing Standards (FIPS) 128 bit encryption

 

Integrated 802.3 compliant 10/100 Mbit network interface

 

RS232, DB9M 9-pin serial port connection

 

Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default)

 

RJ45 8-pin Network Jack

 

2.1mm barrel type power connector (center positive)

 

LED Indicators for Power, Link, and Data

 

Operating Voltage: 12 Volts D.C.

 

Current Draw: approx. 300 mA

 

Housing Dimensions: 4.25" x 6.375" x 2.125"

 

Circuit Board Dimensions: 2.25" x 3.95"

 


INSTALLATION

MANUAL

USER

MANUAL

BROCHURE

Additional Information

Part Number 101-215

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.