M1-XSP LIGHTING / THERMOSTAT / SERIAL INTERFACE

Part Number : 101-214

or

Quick Overview

The Ness-M1XSP is a "3 in 1" product.
ness-corporation-M1-XSP-lighting-termostat-serial-interface

More Views

  • ness-corporation-M1-XSP-lighting-termostat-serial-interface
 
 
  Description    Benefits    Technical Features    Downloads  

Description

The M1XSP is a "3 in 1" product. As a lighting interface, it adapts the M1 Control to many brands of Lighting control products which use “serial" communications. i.e.,OnQ-ALC, PCS-UPB, EDT, CENTRALITE, VANTAGE, etc.

As a thermostat interface, it adapts the M1 Control to HVAC Communicating Thermostats from companies such as:RCS, APRILAIRE, and HAI. As a serial port expander, it expands the RS-232 communication ports of the M1 for multiple connections to most any type of equipment that communicates using serial ASCII commands. i.e., Personal Computers and many types of equipment which feature an RS-232 communications connection.

Jumpers on the M1XSP select the appropriate application, connection, and protocol.

Best of all, the M1XSP operates from the 4-wire (RS-485) M1 Keypad data bus, allowing RS-232 ports to be located long distances from the control. The M1G (Gold) and M1EZ8 Cross Platform Controls support up to 7 M1XSPs while the M1 (Std) supports 1 M1XSP.

The communications baud rate is adjustable from 300 to 38,400 baud.

The unit comes complete with cable and a black surface mountable housing.

 

(Note: For C-Bus interface refer Ness part No 101-236). 

 

Adapts the M1 and M1EZ8 to specific Lighting control products which use "serial" communications.

 

Adapts the M1 and M1EZ8 to specific HVAC Communicating Thermostats from RCS, Aprilaire, and HAI

 

Expands the M1 and M1EZ8 RS-232 Serial Ports

 

Connect to and Operates from the RS485 Data Bus

 

Address Settings via DIP Switches

 

Jumper Options and LED Diagnostic indicator

 

On-Board EOL Bus Termination Jumper

 

Flash Memory for Firmware Updating

 

Maximum of Expandable Ports (Units): 7 with M1G or M1EZ8.

 

Operating Voltage: 12 Volts D.C.

 

Current Draw: 31mA

 

Housing Dimensions: 111.13 mm x 76.3 mm x 28.58 mm (4.375" x 3.0" x 1.125")

 

Circuit Board Dimensions: 88.90 mm x 69.85mm (3.5" x 2.75)

 


INSTALLATION

MANUAL

Additional Information

Part Number 101-214

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.