NESS 3G GSM DIALLER

Part Number : 106-249

or

Quick Overview

Provide a full time 3G GSM pathway for alarm diallers to communicate in the absence of a land line.
Ness Corporation 3G GSM Dialler

More Views

  • Ness Corporation 3G GSM Dialler
 
 
  Description    Downloads    Technical Features  

Description

"3G GSM Dialler"

Worried about the absense of PSTN phone lines with the NBN roll out. Then worry no more as Ness has the solution with our 3G GSM Dialler.

The Ness 3G GSM Dialler provides a full time 3G GSM pathway for alarm diallers to communicate in the absence of a land line. Ideal for “Naked phone line” households, remote locations and anywhere you need easy and reliable dialler monitoring via GSM.

This unit provides support for any Dialler that reports to any Central Monitoring Station (without a need to any special control room receiver) or can dial an alarm event to a personal number, in the same fashion as it would if a land line was available. 

This model is supplied without a SIM card and can be connected to a GSM provider of your choice.

Also includes a back up battery to allow operation in the event of mains power failure.

No programming of GSM Dialler required, just plug in and installation complete.

Supplied with plug pack power supply and 3G GSM Antenna.

NOTE: The product housing shape and colour may vary depending on stock holding in each Ness warehouse.

 

BROCHURE


SPECIFICATIONS

GSM Compatibility      

3G GSM  (2G if no 3G signal available)

SIM CARD
Requires a 3G compatible GSM SIM card (Not supplied)
 
Alarm Panel compatibility     Compatible with all most alarm diallers in Contact ID DTMF and Voice formats, 
Including all Ness systems (e.g. D8X/D16X Series, D8xD / D16XD Series, 
SmartLiving Series and M1 Series) 
 
Operation Voltage 12VDC (Plug Pack Supplied)

Battery Backup
Internal rechargeable Battery (Included)

Battery Backup Time max.
2-3 Hours on its own internal battery.

Power Consumption
25mA (Standby), 300mA (Communicating)

Antenna
3dB whip with magnetic base and 2.9m Cable length

Dimensions
175 x 115 x 35 mm

Weight
200g

Operation Temperature

0°C to +50°C

Additional Information

Part Number 106-249

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.